Holes in series. Hole series are always drilled with a spacing of 32 mm and a hole diameter of 5 mm or 3 mm. The hole series drilling system is a complete set for fast and simple production of series of holes for shelf supports, rear wall supports and fittings with the OF 1010 or OF 1400 router. Everything in a single Systainer. Everything that you need for a series of holes at hand in one Systainer. With the LR 32 system – comprising the guide rail FS 1400/2-LR 32 or FS 2424/2-LR 32 and the hole drilling system – precise rows of holes spaced 32 mm apart can be drilled with the Festool router. The LR 32 guide rail is aligned quickly and parallel to the two side stops, which are positioned by means of an adjustable stop at the workpiece and guide rail. The guide rail is precisely positioned with 9, 5, 16 or 32 mm edge clearance over the stopper in the longitudinal direction. Centring mandrel for perfect centring of the router on the guide plate. Spring-loaded positioning rocker for effective operation when drilling the hole series. Perfectly guided through fine adjustment of the guide play and additional handle on the guide plate. Properly secured thanks to the supplied guide rail clamps. The most important hinge location cutters are already included in the set. Preparing holes series with 32 mm spacing. Drilling of fittings like cupboard hinges. Achieve ideal results more quickly:. Convenient and safe:. Systems get it done:. Highly efficient production of series of holes with 32 mm spacing.. Everything together, everything well organised, everything is close to hand in the Systainer – the complete set incl. dowel drill with 5 mm diameter and fastening clamps.. Compatible with and can be connected to all Systainer generations, mobile dust extractors and many other system accessories. Everything included. Customised vehicle integration. Ergonomic transportation. Open, close, connect with a single turn. A tidy storage system. All-round protection. Content security. Everything in one Systainer: Guide plate, centring mandrel, operating tool, HW hinge location cutter with 35 mm diameter, HW dowel drill with 5 mm diameter (V-shaped tip), HW dowel drill with 5 mm diameter (with centre point and pre-cutter), two parallel side fences with adjustable stop, fastening clamp and two longitudinal stops.. Thanks to the special holder, Systainer³ can be directly integrated into bott vario3 vehicle equipment.. The front carrying handle allows for ergonomic carrying close to the body.. All Systainer³ can be connected to one another and to other generations. The content is accessible at all times, without having to disconnect them first.. Systainer³ units can be connected to many other system accessories, e.g. mobile dust extractors.. Everything is effectively protected against dust, spray water or changes in temperature in the Systainer³.. Thanks to the integrated latch, the content of the Systainer³ can be locked securely. for use with hole line guide rails. for OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400 in the FS-LR 32 hole drilling system
